Auger Fabrication “Universal Tooling” SELF-FEEDING AUGERS

Standard Sizes & Dimensions

Auger Fabrication Universal tooling is designed to be compatible and interchangeable with the widest variety of auger filling equipment. Dimensions and specifications of the most common sizes are listed on the above chart. If dimensions do not match your auger, list all relevant size data (A-H) on the worksheets at the end of this catalog. Unless otherwise specified, all Universal Tooling augers are stainless steel, welded, and polished to a mirror finish. For matching Universal Tooling Straight & Lip Funnels, refer to Form 654-1.

Auger

Size

Dimension Print Number
  A B C D E F G H 13 1/8 OAL 20 1/8 OAL
6 0.350 10.937 1 3/16 4 3/8 1/32 3/32 1 1/2 C-3280 C-3281
8 0.470 11.065 1 7/32 4 3/8 1/32 3/32 1 1/2 C-3280 C-3281
10 0.595 11/187 1 1/4 4 3/8 1/32 3/32 1 1/2 C-3280 C-3281
12 0.720 11.250 1 1/4 4 3/8 1/32 3/32 1 1/2 C-3280 C-3281
14 0.845 11.437 1 1/4 5/16 4 3/8 1/32 3/32 2 3/8 C-3280 C-3281
16 0.970 11.562 1 1/4 5/16 4 3/8 1/32 3/32 2 3/8 C-3280 C-3281
18 1.095 11.687 1 1/2 5/16 4 3/8 1/32 3/32 2 3/8 C-3280 C-3281
20 1.220 11.832 1 1/2 5/16 4 3/8 1/32 3/32 2 3/8 C-3280 C-3281
22 1.345 11.937 1 1/2 3/8 4 3/8 1/32 3/32 2 3/8 C-3280 C-3281
24 1.470 12.062 2 3/8 4 3/8 1/16 1/8 2 3/8 C-3280 C-3281
26 1.595 12.187 2 3/8 4 3/8 1/16 1/8 2 3/8 C-3280 C-3281
28 1.720 12.312 2 1/2 4 3/8 1/16 1/8 2 5/8 C-3280 C-3281
30 1.845 12.437 2 1/2 4 3/8 1/16 1/8 2 5/8 C-3280 C-3281
32 1.970 12.562 2 1/2 4 3/8 1/16 1/8 2 5/8 C-3280 C-3281
34 2.115 12.620 2 1/2 5/8 2 3/8 1/16 1/8 3 1/4 C-3282 C-3281
36 2.220 12.75 2 1/2 5/8 2 3/8 1/16 1/8 3 1/4 C-3282 C-3283
38 2.345 12.84 2 1/2 5/8 2 3/8 1/16 1/8 3 1/4 C-3282 C-3283
40 2.470 12.94 2 1/2 5/8 2 3/8 1/16 1/8 3 1/4 C-3282 C-3283
42 2.595 13.06 3 1/2 5/8 2 3/8 1/16 1/8 4 C-3282 C-3283
44 2.720 13.19 3 1/2 5/8 2 3/8 1/16 1/8 4 C-3282 C-3283
48 2.970 13.37 3 1/2 5/8 2 3/8 1/16 1/8 4 C-3282 C-3283
50 3.095 13.47 3 1/2 5/8 2 3/8 1/16 1/8 4 C-3282 C-3283
52 3.220 13.56 3 1/2 5/8 2 3/8 1/16 1/8 4 C-3282 C-3283

Auger Fabrication, AMS, Mateer-Burt, & Spee-Dee SELF-FEEDING AUGERS

Self-Feeding Augers are used for non-freeflowing powders such as Bakery mixes, Carbon, Talcum Powder, etc. They are commonly used with a slow speed agitator blade, a high speed (Type D) agitator blade, and a Lip Funnel. For products that drip at the end of the fill, a Drip Washer is often installed. Use this page to specify new and replacement Self-Feeding Augers used with Auger Fabrication, AMS, Mateer-Burt and Spee-Dee auger filling machines. Mateer-Burt augers are specified in Form 653.

Specifications

Material of Construction:
Weld:
Tack
Continuous
1 Side
Both Sides
 
Finish:
Rough Grind
Nylon Smooth
High Polish
 
Stem:
Bayonet (shown)
Other
Dimensions
A Overall Length: _____
B Stem Diameter: _____
C1 Rod Diameter: _____
C2 Rod Diameter: _____
D Overflight Diameter: _____
E Diameter: _____
F Pitch: _____
G Stem Length: _____
H Straight Flight: _____
I Flight Thickness: _____
J Depth of Thread: _____
J2 Type of Thread: _____
K Pin Location: _____
L Pin Diameter: _____
M Pin Length: _____
N Flight Relief: _____ Yes _____ No 

Mateer-Burt “NEOTRON” SELF-FEEDING AUGERS

These augers are specifically offered as replacements or spares with NEOTRON SYSTEMTM auger fillers manufactured by Mateer-Burt. Dimensions and specifications of the most common sizes are listed on the adjacent chart. If dimensions do not match your auger, list all relevant size data (A-H) on the worksheets at the end of this catalog. For Model 31A fillers from Mateer-Burt, refer to Forms 651-1 & 651-2.

Standard Sizes & Dimensions

Auger

Size

Dimension Print Number
  A B C D E F G H 13 1/8 OAL 20 1/8 OAL
6 0.350 10.937 1 3/16 4 3/8 1/32 3/32 1 1/2 C-3280 C-3281
8 0.470 11.065 1 7/32 4 3/8 1/32 3/32 1 1/2 C-3280 C-3281
10 0.595 11/187 1 1/4 4 3/8 1/32 3/32 1 1/2 C-3280 C-3281
12 0.720 11.250 1 1/4 4 3/8 1/32 3/32 1 1/2 C-3280 C-3281
14 0.845 11.437 1 1/4 5/16 4 3/8 1/32 3/32 2 3/8 C-3280 C-3281
16 0.970 11.562 1 1/4 5/16 4 3/8 1/32 3/32 2 3/8 C-3280 C-3281
18 1.095 11.687 1 1/2 5/16 4 3/8 1/32 3/32 2 3/8 C-3280 C-3281
20 1.220 11.832 1 1/2 5/16 4 3/8 1/32 3/32 2 3/8 C-3280 C-3281
22 1.345 11.937 1 1/2 3/8 4 3/8 1/32 3/32 2 3/8 C-3280 C-3281
24 1.470 12.062 2 3/8 4 3/8 1/16 1/8 2 3/8 C-3280 C-3281
26 1.595 12.187 2 3/8 4 3/8 1/16 1/8 2 3/8 C-3280 C-3281
28 1.720 12.312 2 1/2 4 3/8 1/16 1/8 2 5/8 C-3280 C-3281
30 1.845 12.437 2 1/2 4 3/8 1/16 1/8 2 5/8 C-3280 C-3281
32 1.970 12.562 2 1/2 4 3/8 1/16 1/8 2 5/8 C-3280 C-3281
34 2.115 12.620 2 1/2 5/8 2 3/8 1/16 1/8 3 1/4 C-3282 C-3281
36 2.220 12.75 2 1/2 5/8 2 3/8 1/16 1/8 3 1/4 C-3282 C-3283
38 2.345 12.84 2 1/2 5/8 2 3/8 1/16 1/8 3 1/4 C-3282 C-3283
40 2.470 12.94 2 1/2 5/8 2 3/8 1/16 1/8 3 1/4 C-3282 C-3283
42 2.595 13.06 3 1/2 5/8 2 3/8 1/16 1/8 4 C-3282 C-3283
44 2.720 13.19 3 1/2 5/8 2 3/8 1/16 1/8 4 C-3282 C-3283
48 2.970 13.37 3 1/2 5/8 2 3/8 1/16 1/8 4 C-3282 C-3283
50 3.095 13.47 3 1/2 5/8 2 3/8 1/16 1/8 4 C-3282 C-3283
52 3.220 13.56 3 1/2 5/8 2 3/8 1/16 1/8 4 C-3282 C-3283

NEOTRON SYSTEM is a trademark of Mateer-Burt

 

Per-Fil STRAIGHT & SELF-FEEDING AUGERS

AUGER FABRICATION can also supply direct replacement augers originally manufactured by Per-Fil Industries, Inc. Use the chart to specify and order both straight and self feeding Per-Fil augers. For matching Per-Fil funnels, use Form 657.

Dimension & Ordering Information

_ Straight Auger _ Self Feeding Auger
A: ______ A: ______
B: ______ B: ______
C: ______ C: ______
D: ______ D: ______
E: ______ E: ______
F: ______ F: ______
G: ______ G: ______
H: ______ H: ______
  I: ______
  J: ______
  K: ______

 

 

Made of stainless steel and polished to a mirror finish, augers and funnels for filling machines are precision tools. Auger
stems and O.D. flight are exactly concentric to avoid erratic dispensing. And, they are available with the proper stem end
fitment(bayonet, single or double key etc.) for direct replacement in the specified filling machine.

 

 

STEM END FITTINGS


Augers for Filling machines have a
specific type of end fitting dependent
upon the make of the machine. Check
the desired stem as shown to the right.


Finish


Rough Grind
Nylon Smooth
High Polish

Request a Consultation With an Expert

We’re easy to talk to for all inquiries, questions, or comments. Complete this simple form below to request further information tailored to your needs.

Contact us today