Auger Fabrication “Universal Tooling” STRAIGHT AUGERS

Auger Fabrication Universal tooling is designed to be compatible and interchangeable with the widest variety of auger filling equipment. Dimensions and specifications of the most common sizes are listed below. If dimensions do not match your auger, list all relevant size data (A-J) on the worksheets at the end of this catalog. Unless otherwise specified, all Universal Tooling augers are stainless steel, welded, and polished to a mirror finish. For matching Universal Tooling Straight & Lip Funnels, refer to Form 654-1.

Size Dimensions
  A B C D E F G H I J
6 0.350 1/2 6 5/8 3/16 3/16 5/16’ 6-32 3/32 1/32 0.140
8 0.470 1/2 6 5/8 3/16 3/16 5/16’ 6-32 3/32 1/32 0.140
10 0.595 5/8 6 5/8 7/32 3/16 5/16’ 10-32 3/32 1/32 0.140
12 0.720 1 4 3/8 1/4 3/16 5/16’ 10-32 3/32 1/32 0.257
14 0.845 1 1/4 4 3/8 5/16 3/8 5/8 10-32 3/32 1/32 0.257
16 0.970 1 1/4 4 3/8 5/16 3/8 5/8 1/4-20 3/32 1/32 0.257
18 1.095 1 1/2 4 3/8 5/16 3/8 5/8 1/4-20 3/32 1/32 0.257
22 1.345 1 1/2 4 3/8 3/8 3/8 5/8 1/4-20 1/8 1/16 0.257
24 1.470 2 4 3/8 3/8 3/8 5/8 1/4-20 1/8 1/16 0.257
26 1.595 2 4 3/8 3/8 1/2 5/8 1/4-20 1/8 1/16 0.257
28 1.720 2 4 3/8 1/2 1/2 5/8 1/4-20 1/8 1/16 0.257
30 1.845 2 4 3/8 1/2 1/2 5/8 1/4-20 1/8 1/16 0.257
32 1.970 2 4 3/8 1/2 1/2 5/8 1/4-20 1/8 1/16 0.257
Print Numbers:
13 1/8 OAL: C-3276
20 1/8 OAL: C-3277

Auger Fabrication, AMS, Mateer-Burt, & Spee-Dee STRAIGHT AUGERS

Straight Augers are typically used for free-flowing powders such as granulated sugar, salt, bread crumbs, etc. They are commonly used with high and slow speed agitator blades, a straight funnel, collector funnels, spinner plates, etc. Use this page to specify new and replacement Straight Augers used with ALL-FILL, AMS, MateerBurt and Spee-Dee auger filling machines. Mateer-Burt Neotron augers are specified in Form 653.

Mateer-Burt “NEOTRON” STRAIGHT AUGERS

These augers are specifically offered as replacements or spares with NEOTRON SYSTEMTM auger fillers manufactured by Mateer-Burt. Dimensions and specifications of the most common sizes are listed below. If dimensions do not match your auger, list all relevant size data (A-J) on the worksheets at the end of this catalog. Unless otherwise specified, all Neotron augers are stainless steel, welded, and polished to a mirror finish. For Model 31A fillers from Mateer-Burt, refer to Forms 651-1 & 651-2.

Size Dimensions
  A B C D E F G H I J
6 0.350 1/2 6 5/8 3/16 3/16 5/16’ 6-32 3/32 1/32 0.140
8 0.470 1/2 6 5/8 3/16 3/16 5/16’ 6-32 3/32 1/32 0.140
10 0.595 5/8 6 5/8 7/32 3/16 5/16’ 10-32 3/32 1/32 0.140
12 0.720 1 4 3/8 1/4 3/16 5/16’ 10-32 3/32 1/32 0.191
14 0.845 1 1/4 4 3/8 5/16 3/8 5/8 10-32 3/32 1/32 0.257
16 0.970 1 1/4 4 3/8 5/16 3/8 5/8 1/4-20 3/32 1/32 0.257
18 1.095 1 1/2 4 3/8 5/16 3/8 5/8 1/4-20 3/32 1/32 0.257
22 1.345 1 1/2 4 3/8 3/8 3/8 5/8 1/4-20 1/8 1/16 0.257
24 1.470 2 4 3/8 3/8 3/8 5/8 1/4-20 1/8 1/16 0.257
26 1.595 2 4 3/8 3/8 1/2 5/8 1/4-20 1/8 1/16 0.257
28 1.720 2 4 3/8 1/2 1/2 5/8 1/4-20 1/8 1/16 0.257
30 1.845 2 4 3/8 1/2 1/2 5/8 1/4-20 1/8 1/16 0.257
32 1.970 2 4 3/8 1/2 1/2 5/8 1/4-20 1/8 1/16 0.257

NEOTRON SYSTEM is a trademark of Mateer-Burt

Made of stainless steel and polished to a mirror finish, augers and funnels for filling machines are precision tools. Auger
stems and O.D. flight are exactly concentric to avoid erratic dispensing. And, they are available with the proper stem end
fitment(bayonet, single or double key etc.) for direct replacement in the specified filling machine.

 

STEM END FITTINGS


Augers for Filling machines have a
specific type of end fitting dependent
upon the make of the machine. Check
the desired stem as shown to the right.

 

Request a Consultation With an Expert

We’re easy to talk to for all inquiries, questions, or comments. Complete this simple form below to request further information tailored to your needs.

Contact us today